What if you might develop a clock that screens time in the normal analog format, however with the hands moving around the outside of the dial instead of turning from a central point? This is the concept behind TORLO, a gorgeous clock developed from 3D printed parts.
The clock is the work of [ekaggrat singh kalsi], who wished to develop a clock utilizing a self-oscillating motor. preliminary experiments had some success, nevertheless [ekaggrat] encountered issues with the motors holding consistent time, as well as contacts using out. This is typical in lots of electromechanical systems — mechanics who had to work with points ignition will not keep in mind them fondly. After pushing on with a number of revisions, it was made a decision instead to switch to an ATtiny-controlled motor which was pulsed when every two seconds. This had the benefit of keeping precise time in addition to making it much much easier to set the clock.
The sensational part of the clock, however, is the mechanical design. The smooth, sweeping type is extremely pleasing to the eye, as well as it’s integrated with a gorgeous two-tone colour plan that makes the subjected gears as well as signs pop against the white frame. The minute as well as hour hands type the most striking part of the style — the signs are connected to a big sound gear that is turned by the gear train developed into the frame. The video below the break shows the advancement process, however we’d like to see a close-up of exactly how the gear train meshes with the big sound gears which are such an sophisticated part of the clock.
A fantastic benefit of 3D printing is that it makes creating custom-made gear trains extremely accessible. We’ve seen other unconventional 3D printed clock develops before.