Motorola has started rolling out the Android 6.0 Marshmallow update Moto G 2014, the second generation Moto G. The update is rolling out OTA (over the air) in a phased manner. This indicates that while your good friends utilizing the exact same phone may have got the Marshmallow update notification, you may still be waiting on it on your unit. This is relatively typical as well as expected when updates are rolled out in stages. However, if you cannot or do not want to wait on Motorola, you can set up the Marshmallow update on your Moto G manually.
Before you get started with this handbook update process, you must understand a few things. To be able to set up the Marshmallow OTA update, your Moto G must have an untouched, unmodified system. In other words, you must not have flashed a custom-made kernel, recovery, SuperSU or anything else. other things like custom-made font style files, audio mods or just about anything else you may have flashed to the system partition will have customized the system. This will cause the OTA update flash to stop working as well as may even brick your device.
The next thing you will want to inspect is if your phone has its stock recovery. If you have flashed a custom-made healing like TWRP, you can download a TWRP backup of the stock Marshmallow update from XDA here and bring back it directly (check right here for a lot more details).
Additionally, if you have an unmodified system with the stock recovery, utilizing this technique to manually update your Moto G will not void your warranty.
Install Android 6.0 Marshmallow Firmware on Moto G
In any type of other case, that is, if you have an unmodified system with the stock healing intact, comply with the steps below to manually update your Moto G to Marshmallow.
Pre-requisites
Download the Marshmallow OTA zip file: Blur_Version.24.41.34.titan_retaildsds.retaildsdsall.en.03.zip | Mirror
Installation
Once you have downloaded the update zip file, location it in your Moto G’s interior storage or the microSD card. interior storage is recommended.
Now, open settings as well as go to about -> software application updates. tap on the “Check for Updates” button. Your phone must screen a popup stating an update is available.
If you get the popup in the second step, comply with the on-screen prompts to set up the Marshmallow update. However, if you don’t get the popup for some reason, there is one more method you can try.
Make sure the OTA update data has been downloaded as well as transferred to the phone correctly.
Turn your Moto G off.
Press as well as hold the Power as well as volume Up as well as volume Down simultaneously. continue to hold these buttons up until your phone vibrates as well as screens a menu.
You will now be in the Fastboot/Bootloader mode.
Now, utilize the volume down button to highlight “Recovery” option. press the Power button to verify it.
Your Moto G will now boot into the stock recovery.
Again, press the volume button to highlight “Apply update from SD Card”.
Press the power button to verify it.
The update installation process will now begin.
Once the Marshmallow update is installed, your phone will reboot as well as begin optimizing apps. At the end of it, it will boot into Android with the current Marshmallow update installed!